User's Manual

Installation and configuration 123
Screen prompt
Description
Data VLAN Cfg? (0-Auto, 1-Man) Default 1 (for Man).
You are not prompted for Data
VLAN Cfg if LLDP or Data VLAN
are not enabled and PC Port is
set to 0 for Off.
If you select 0 (for Auto), VLAN
ID is automatically configured to
the value received in the VLAN
NAME TLV.
Data VLAN ID:
You are not prompted for Data
VLAN ID if Data VLAN is set to 0
for Auto.
Data pBits (0-7, 8-Au) Default 8 (for Au).
You are not prompted for Data
pBits if the PC Port is set to 0 for
Off or if 802.1Q is not enabled.
PCUntagAll? (0-N, 1-Y) Default 0 (for No).
PSK SRTP? (0-No, 1-Yes) Default 0 (for No).
GARP Ignore? (0-No,1-Yes) Default 0 (for No).
The IP Phone 2004 searches for the connect server.
10 Enter the following information:
Screen prompt
Description
Password
IP Phone Installer Password.
You are not prompted to enter the IP
Phone Installer Password if it has not
been configured in your Call Server.
Node The node ID.
TN The TN or VTN.
The IP Phone 2004 registers with the TPS and, if needed, begins
the firmware download. This takes several minutes. When the
download is complete, the IP Phone 2004 resets.
The current Call Server date and time appear on the top line of
the display when the configuration is complete. Self-labeling
keys also appear.
11 Check for a dial tone and the correct DN above the display.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.