User's Manual

132 IP Phone Key Expansion Module (KEM)

Table 17

LD 11: Configure the IP Phone KEM (cont’d.)

Prompt Response Description

KEM (0) – 2

Number of attached IP Phone KEMs

Up to two IP Phone KEMs can be attached to an IP

Phone. Pressing <CR> without entering a number leaves

the value unchanged.

....

KEY xx aaa yyyy (cccc or D) zz..z

Telephone function key assignments

The following key assignments determine calling options

and features available to an IP Phone. Note that KEY is

prompted until a carriage return <CR> is entered.

Where:

xx = key number

aaa = key name or function

yyy = additional information required for the key

zz.z = additional information required for the key aaa.

The cccc or D entry deals specifically with the Calling Line

Identification feature, where:

cccc = CLID table entry of (0)-N, where N = the value

entered at the SIZE prompt in LD 15 minus 1.

D = the character "D". When the character "D" is entered,

the system searches the DN keys from key 0 and up,

to find a DN key with a CLID table entry. The CLID

associated with the found DN key is then used.

The position of the (cccc or D) field varies depending on

the key name or function.

You may enter a CLID table entry if aaa = ACD, HOT d,

HOT L, MCN, MCR, PVN, PVR, SCN, or SCR.

Type xx NUL to remove a key function or feature.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009