User's Manual

Installation and configuration 151
Table 22
Components list for EMEA (cont’d.)
Table 23 "Power cords" (page 151) lists the IP Audio Conference Phone
2033 power cords.
Table 23
Power cords
IP Audio Conference Phone 2033 power cords
NA NEMA 5-15P, 125V 13A (10ft.) NTTK14AB
Euro CEE (7) VII, 250V, 10A (2.5m) NTTK16AB
ANZ AS3112, 250V 10A (2.5m) NTTK15AA
Swiss SEV 1011, 250V 10A (8ft.) NTTK17AB
UK/Ireland BS1363, 240V 10A (8ft.) NTTK18AB
Denmark AFSNIT, 250V 10A (2.5m) NTTK22AB
Argentina IRAM 2073, 250V 10A (8ft.) A0814961
Japan 1.8 m (5.9 ft), 10 amp, IEC320-C13 NTTK26AAE6
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Audio Conference Phone 2033:
• “Before you begin” (page 151)
•
“First-time installation” (page 152)
• “Configuring the IP Audio Conference Phone 2033” (page 152)
•
“Startup sequence” (page 154)
•
“Installing the IP Audio Conference Phone 2033” (page 155)
Before you begin
Before installing the IP Audio Conference Phone 2033, complete the
following pre-installation checklist:
• Ensure one Software License exists for each IP Audio Conference
2033 Phone you install.
• Ensure one IP Audio Conference Phone 2033 boxed package exists
for each IP Audio Conference Phone 2033 you install. See Table
21 "Components list for US, CA, CALA, AP, and GC" (page 149) or
Table 22 "Components list for EMEA" (page 150) for a list of package
contents.
• Ensure the host Call Server is equipped with a Signaling Server that
runs the Line TPS application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.