User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

151

152

153

154

155

156

157

158

159

160

152 Nortel IP Audio Conference Phone 2033

• If an AC power adapter is required, ensure you use the correct AC

power transformer. The voltage rating of the transformer must match

the wall outlet voltage. See Table 21 "Components list for US, CA,

CALA, AP, and GC" (page 149) or Table 22 "Components list for

EMEA" (page 150).

• Ensure the latest IP Phone firmware is deployed to the IP

telephony node. For more information, see IP Line Fundamentals

(NN43100-500).

First-time installation

You must first install an IP telephony node with the Communication Server.

For information about installing an IP telephony node, see Signaling Server

Installation and Commissioning (NN43001-312) or IP Line Fundamentals

(NN43100-500).

CAUTION

Service Interruption

Do not plug your IP Audio Conference Phone 2033 into an ISDN

connection. Severe damage can result.

Conﬁguring the IP Audio Conference Phone 2033

Use Procedure 27 “Configuring the IP Audio Conference Phone 2033”

(page 152) to configure the IP Phone for the first time.

Procedure 27

Conﬁguring the IP Audio Conference Phone 2033

Step Action

1 Configure a virtual loop on the system using LD 97.

For more information about configuring a virtual loop, see IP

Line Fundamentals (NN43100-500) and Software Input Output

Reference-Administration (NN43001-611).

2 Configure the IP Audio Conference Phone 2033 on the system

using LD 11. At the prompts, enter the following:

REQ:new

TYPE:2033

TN cc uu

ECHG yes

ITEM cls

ITEM

For more information about configuring the IP Audio Conference

Phone 2033 using LD 11, see Software Input Output

Reference-Administration (NN43001-611).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009