User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

151

152

153

154

155

156

157

158

159

160

160 Nortel IP Audio Conference Phone 2033

The IP Audio Conference Phone 2033 can support primary (S1) and

secondary (S2) connect server. If you require IP Phones to register on

multiple nodes, see

IP Line Fundamentals (NN43100-500).

A Signaling Server provides the firmware for the IP Phones. For

information about upgrading IP Phone firmware, see IP Line Fundamentals

(NN43100-500). For information about the IP Phone firmware

upgrade using Element Manager, see Element Manager System

Reference—Administration (NN43001-632).

Check the Nortel Web site for updated firmware files. See

ww.nortel.com/downloadingcontent

for download instructions. Go to

Product Category: Phones, Clients & Accessories, Product Name: IP

Phone IP Audio Conference Phone 2033, Content type: Firmware. Obtain

the precise Release, Status, and Title of the file from your next level of

support.

ATTENTION

Timing information

There are only four seconds between plugging in the IP Audio Conference

Phone 2033 power transformer and the appearance of the text Nortel in the

display. When you see the text Nortel, you have 1 second to respond by

pressing the three soft keys at the bottom of the display in sequence from left

to right, one at a time. If you miss the 1-second response time, the IP Audio

Conference Phone 2033 attempts to locate the connect server. You can begin

the power-up sequence again, or you can double-press the Services key to open

the network diagnostic utilities to access the IP Phone settings. See “IP Phone

diagnostic utilities” (page 493).

A tone sounds shortly before the IP Phone is ready to start the Nortel IP

Phone application. Once the application has loaded and started, the Nortel

logo and Starting DHCP appears at the bottom of the screen.

To edit network configuration, the following soft keys are available:

• OK—accept current settings and proceed to the next configuration

option. If all configuration options are presented, the configuration is

saved and the IP Phone reboots with the saved changes.

• BkSpace—erase a configuration entry to change it

• Clear—clear an entire configuration entry

• Cancel—cancels network configuration. The IP Phone reboots without

saving changes.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009