User's Manual

Redeploying an IP Audio Conference Phone [phone]
— Auto-Negotiate Capability: N
— Auto-Negotiate Completed: N
--End--
Extensible Authentication Protocol
Extensible Authentication Protocol (EAP) is a general protocol that fulfills
the protocol requirements defined by 802.1x. For further information about
802.1x, see “802.1x Port-based network access control” (page 479).
Redeploying an IP Audio Conference Phone 2033
You can redeploy an existing previously configured IP Audio Conference
Phone 2033 on the same system. For example, the IP Audio Conference
Phone 2033 can be assigned to a new user (new TN) or to an existing
user who moved to a new subnet by changing the TN of the IP Audio
Conference Phone 2033. For further information, see
Converging the Data
Network with VoIP Fundamentals (NN43001-260).
Procedure 32
Changing the TN of an existing IP Audio Conference Phone 2033
Step Action
1 Repower the IP Audio Conference Phone 2033.
During the reboot sequence of a previously configured the
IP Audio Conference Phone 2033 displays the existing node
number for approximately five seconds.
2 If the node password is enabled and NULL, choose one of the
following:
a Disable the password.
b Set the password as non-NULL.
3 Press OK when the node number displays.
If Then
the node password is enabled
and is not NULL
a password screen displays. Go
to Step 4.
the node password is disabled a TN screen displays. Go to Step
5.
4 Enter the password at the password screen, and press OK.
A TN screen displays.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.