User's Manual

168 Nortel IP Audio Conference Phone 2033
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
5 Select the Shift soft key labeled (>>) and press Clear to edit the
TN field. The IP Audio Conference Phone 2033 by default places
you in the units field of the TN. You cannot use backspace to
move to the loop, shelf or card fields.
6 Enter the new TN.
--End--
Replacing an IP Audio Conference Phone 2033
ATTENTION
Two IP Phones cannot share the same TN. You must remove the IP Audio
Conference Phone 2033 that currently uses the TN.
Procedure 33
Replacing an IP Audio Conference Phone 2033
Step Action
1 Obtain the node and TN information of the phone you want to
replace.
2 Disconnect the IP Audio Conference Phone 2033 that you want
to replace.
3 Follow Procedure 27 “Configuring the IP Audio Conference
Phone 2033” (page 152) and Procedure 28 “Installing the IP
Audio Conference Phone 2033 using manual configuration”
(page 156) to install and configure the IP Audio Conference
Phone 2033.
4 Enter the same TN and Node Number as the IP Audio
Conference Phone 2033 you replaced. The system associates
the new IP Audio Conference Phone 2033 with the existing TN.
--End--
Removing an IP Audio Conference Phone 2033 from service
Procedure 34
Removing an IP Audio Conference Phone 2033 from service
Step Action
1 Disconnect the IP Audio Conference Phone 2033 from the
network or turn off the power.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.