User's Manual

Components and functions 173
Components and functions
This section describes the following components and functions of the IP
Phone 2007:
• “Keys and functions” (page 173)
• “Services menu” (page 174)
• “Local Tools menu” (page 175)
Keys and functions
Table 25 "IP Phone 2007 keys and functions" (page 173) lists the keys
and functions for the IP Phone 2007.
Table 25
IP Phone 2007 keys and functions
Key Function
Hold Press the Hold key to put an active call on hold. Tap the flashing line
(DN) soft key to return to the caller on hold.
Goodbye Press the Goodbye key to terminate an active call.
Handsfree
Press the Handsfree key to activate handsfree.
The LED lights to indicate when the handsfree feature is active.
Headset Press the Headset key to answer a call using the headset or to switch a
call from the handset or handsfree to the headset.
Mute
Press the Mute key to listen to the receiving party without transmitting.
Press the Mute key again to return to a two-way conversation. The Mute
key applies to handsfree, handset, and headset microphones.
The Mute LED flashes when the Mute option is in use.
Volume control bar
Use the Volume control bar to adjust the volume of the ringer, handset,
headset, speaker, and the Handsfree feature.
Press the right side of the rocker bar to increase volume, the left side to
decrease volume.
Message waiting
light/incoming call
indicator
The Message waiting indicator turns ON to indicate that a message has
been left for the user. This indicator also flashes when the set ringer is
ON.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.