User's Manual

Dialpad entry 179
Touch panel
You perform point and click operations on your IP Phone 2007 using the
touch panel. The touch panel is used with the graphical user interface
(GUI) to present soft keys directly on the display. You can activate all
Line/DN keys and feature soft keys by using the touch panel.
Calibrate the touch panel
Calibrate the touch panel through the Tools menu, which enables you to
fine- tune the touch panel. You are prompted to use the stylus to tap three
targets.
For further information, see Calibrating the touch panel and stylus.
Stylus
Operate the touch panel using a stylus or your finger. However, use of a
stylus is recommended to avoid damage to the touch panel.
Dialpad entry
For ease of use, Nortel recommends the use of the external USB
keyboard.
The following rules apply when you enter text and special characters using
the dialpad.
• Press a key from 0 to 9 once to enter the corresponding number.
•
Press a key from 2 to 9 repeatedly to cycle through the letters
assigned to that key, first in lower case and then in upper case.
For example, if you press the 5 key repeatedly, the following
characters are displayed, one at a time:
j -> k -> l -> J -> K -> L -> 5 ->
See Table 28 "Character key mappings" (page 180) for character key
mappings.
•
The insertion point remains in the its current position as long as you
continue to press the same key.
• The entry is accepted if either a new key is pressed or if two seconds
pass with no entry. The insertion point moves 1 space to the right.
For example, to enter the word Nortel, press the following key
sequence:
6 [2 second delay] 67835
Although special characters are not required, key 1 generates
commonly used special characters, such as the period (.), at symbol
(@), and underscore (_).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.