User's Manual

Installation and configuration 185
Table 30
IP Phone 2007 component list (cont’d.)
Component
Product code
Global power adapter N0014020
IP Phone 2007 power cords
Cord 9.9 ft. NA Power, NEMA, 125 Vac 13
a
NA, M.East, Taiwan, Indonesia, Philippines, Korea, Thailand,
Vietnam, Japan
NTTK14AB
Cord 8 ft., ANA Power AS-3, 240 Vac 10A
Australia, New Zealand, PRC
NTTK15AA
Option 11C Standard European Power Cord 250 Vac
Other EMEA, Kenya
NTTK16AB
Option 11C Swiss Power Cord, 9.9 ft. 125 Vac
Switzerland
NTTK17AB
Option 11C UK Power Cord 240 Vac
Hong Kong, Ireland, UK, Singapore, Malaysia, India, Bangladesh,
Pakistan, Brunei, Sri Lanka
NTTK18AB
Option 11C Denmark Power Cord Kit, 9.9 ft. 125 Vac
Denmark
NTTK22AB
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 2007:
• “Before you begin” (page 185)
•
“First-time installation” (page 186)
•
“Configuring the IP Phone 2007” (page 186)
•
“Startup sequence” (page 188)
•
“Installing the IP Phone 2007” (page 189)
Before you begin
Before installing the IP Phone 2007, complete the following pre-installation
checklist:
• Ensure one IP Phone 2007 boxed package exists for each IP Phone
2007 you install. For a list of IP Phone 2007 package components, see
Table 29 "Package components" (page 184).
• Ensure one Software License exists for each IP Phone 2007 you
install.
• Ensure the host Call Server is equipped with a Signaling Server that
runs the Line TPS application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.