User's Manual

Installation and configuration 187

with a LAN icon). Plug the other end of the CAT5e Ethernet

cable into the IP network.

• For an IP Phone sharing a LAN access with a PC (identified

with a PC icon):

Connect one end of the CAT5e Ethernet cable to the LAN

Ethernet port located on the back of the IP Phone and the

other end to the IP network. Insert one end of a second

CAT5e Ethernet cable into the PC Ethernet port located on

the back of the IP Phone and the other end into the computer

Ethernet port.

The LAN Ethernet port supports Auto-Media Dependent Interface

Crossover (MDIX). Auto-MDIX is supported only when the

Ethernet port is configured for autonegotiation. The PC Port

does not support Auto-MDIX.

5 Secure the IP Phone footstand to the base of the IP Phone. Use

the angle adjustment grip on the top back of the IP Phone to

adjust the position.

CAUTION

Damage to Equipment

Do not plug any device into your IP Phone 2007

Ethernet port other than an IEEE 802.3 Ethernet

network connection. The IP Phone 2007 does not

support multiple devices connected through the PC

Ethernet port.

Figure 23

IP Phone 2007 connections

6 Power the IP Phone 2007 using either the Power over Ethernet

or the Global power adapter (local power).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009