User's Manual

190 Nortel IP Phone 2007
ATTENTION
When you install the IP Phone for the first time the first prompt that appears is
the DCHP? [0-N, 1-Y]. Not all of the listed screen prompts appear on the phone
display during the first time installation of the phone.
Procedure 37
Installing the IP Phone 2007
Step Action
1 Use the Right navigation key to scroll and highlight the Enable
802.1x Auth. (EAP): list box.
2 Press the Down navigation key to open list box.
3 Use the Up/Down navigation keys to scroll and highlight Yes
to enable 802.1x Authentication, or No to disable 802.1x
Authentication.
4 If 802.1x Authentication is enabled, use the dialpad to fill in the
following information:
• Device ID
• Password
•
Retype the password
Use the dialpad to enter digits only. To enter alpha characters,
use either the IP Phone 2007 pop-up keyboard, or a USB
keyboard.
For further information about EAP, see “802.1x Port-based
network access control” (page 479).
If you do not enable 802.1x Authentication, you are not prompted
to enter Device ID and Password.
5 Use the Right navigation key to scroll and highlight Enable
802.1x (LLDP Enable).
For more information about LLDP, see “802.1ab Link Layer
Discovery Protocol” (page 481).
6 Use the Up/Down navigation keys to scroll and highlight Yes to
enable LLDP, or No to disable LLDP.
LLDP is one means in which 801.2 can be automatically
provisioned.
For more information about 802.1Q, see “802.1Q VLAN
description” (page 471).
7 Use the Right navigation key to scroll and highlight DHCP list.
8 Press the Down navigation key to open list box.
9 Use the Up/Down navigation keys to scroll and highlight
Primary DNS IP. Use the dialpad to fill in the information.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.