User's Manual

192 Nortel IP Phone 2007
For more information about Secure Multimedia Controller,
seeSecure Multimedia Controller Implementation Guide
(NN43001-325).
18 Use the Right navigation key to scroll and highlight Retry. Use
the dialpad to fill in the information:
Retry—the maximum number of times the IP Phone 2007 tries
again to connect to the server after the first try is unsuccessful.
19 Use the Right navigation key to scroll and highlight S1 PK.
S1 PK— the Private key of the Secure Multimedia Controller to
which the IP Phone connects.
20 Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S1 PK default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits from a to f, use the graphical keyboard or
a USB keyboard to enter the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
21 Use the Right navigation key to scroll and highlight S2 IP. Use
the dialpad to fill in the information:
S2 IP—the secondary CS 1000 node IP address for IP Phone
2007
IP Phone 2007 can support a primary (S1) and secondary (S1)
connect server. If you require IP Phones to register on multiple
nodes, see IP Line Fundamentals (NN43100-500).
22 Use the Right navigation key to scroll and highlight Port. Use
the dialpad to fill in the information:
Port—same as S1 port
23 Use the Right navigation key to scroll and highlight S2 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill
in the information. Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Multimedia Controller, enter 6 or 1
For more information about Secure Multimedia Controller,
see Secure Multimedia Controller Implementation Guide
(NN43001-325).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.