User's Manual

Installation and configuration 193
24 Use the Right navigation key to scroll and highlight Retry. Use
the dialpad to fill in the information:
Retry—same as S1
25 Use the Right navigation key to scroll and highlight S2 PK.
S2 PK— the Private key of the alternate Secure Multimedia
Controller to which the IP Phone connects
26 Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S2 PK default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
Use the graphical keyboard or a USB keyboard to enter ALPHA
digits from a to f.
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
27 Use the Right navigation key to scroll and highlight Ntwk Port
Speed box. Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of
the following options:
• Auto—Link speed is autonegotiated with the network device.
•
10BT Full—Link speed is available for up to 10 Megabit Full
Duplex on the network.
• 100BT Full—Link speed is available for up to 100 Megabit
Full Duplex on the network.
28 Use the Right navigation key to scroll and highlight Ntwk Port
Duplex box. Press the Down navigation key to open the list box.
The Ntwk Port Duplex option appears dimmed if Ntwk Port
Speed is set to Auto.
Use the Up/Down navigation keys to scroll and highlight one of
the following options:
• Auto—Duplex mode is autonegotiated with the network
device
•
Force Full—Duplex mode is forced to Full Duplex on the
network
• Force Half—Duplex mode is forced to Half Duplex on the
network
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.