User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

191

192

193

194

195

196

197

198

199

200

Installation and configuration 197

50 If an External Application Server (XAS) is available in the

network, use the Right navigation key to scroll and highlight the

XAS IP list. Use the dialpad to enter the XAS IP address.

The XAS delivers business applications to the IP Phone. For

more information about XAS, see Nortel Application Gateway

1000 documentation.

51 Use the Right navigation key to scroll and highlight the

Graphical XAS check box.

52 Use the Right navigation key to scroll and highlight the Port list.

Use the dialpad to fill in the information.

53 Upgrade the IP Phone 2007 firmware.

The IP Phone 2007 supports remote firmware upgrades through

a TFTP process and an automated UFTP process.

The method to upgrade the firmware depends on the following

Call Server software:

• For Succession Release 3.0 or CS 1000 Release 4.0, the

TFTP Server is required to download the current firmware.

Enter the TFTP Server IP address at the prompt.

•

For CS 1000 Release 4.5, use either the call server UFTP

download (at the prompt accept the default entry of 0.0.0.0)

or TFTP Server to download the current firmware.

The Enhanced UNIStim firmware download is supported on CS

1000 Release 4.5 or later. The Enhanced UNIStim firmware

download feature for IP Phones improves the delivery of new

firmware to IP Phones. For further information about Enhanced

UNIStim Firmware Download, see IP Line Fundamentals

(NN43100-500).

For information about the IP Phone firmware upgrade

using Element Manager, see Element Manager System

Reference—Administration (NN43001-632).

The IP Phone 2007 can support a primary (S1) and secondary

(S2) connect server. If you require IP Phones to register on

multiple nodes, see IP Line Fundamentals (NN43100-500).

The IP Phone 2007 searches for the connect server.

The IP Phone 2007 registers with the Terminal Proxy Server

(TPS) and, if needed, begins the firmware download. This takes

several minutes. When download is complete, the IP Phone

2007 resets.

The current system date and time appear on the top line of the

display when the configuration is complete. Self-labeling keys

also appear.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009