User's Manual

198 Nortel IP Phone 2007
For further information about TFTP Server configuration, see
“TFTP Server” (page 557).
54 Check for dial tone and the correct DN above the display.
55 (Optional) Customize the feature keys as required. For more
information, see the
IP Phone 2007 User Guide (NN43118-100).
56 Tap the Tools icon to calibrate the touch panel and stylus.
57 Tap the Touch Panel Setup soft key.
The screen displays a calibration map, the Cancel soft key is
displayed, and the following system prompt is displayed:
Touch the center of the red ball.
58 Use the stylus and tap each of the red dots, in order, starting
with the lower left portion of the screen, and following the
sequence as prompted.
After the third dot is tapped, the display changes to indicate the
result of calibration.
• If the calibration is successful, the IP Phone displays the
following report:
Data calibration is CORRECT.
Save Data calibration?
YES and NO soft keys and calibration statistics are displayed
on the screen.
Tap the YES soft key to save the calibration settings and exit
to the main display or tap the NO soft key to abandon the
calibration settings and exit to the main display.
• If the calibration is unsuccessful, the IP Phone displays the
following report:
Data calibration is WRONG.
Repeat calibration?
YES and NO soft keys and calibration statistics are displayed
on the screen.
Tap the YES soft key to retry the calibration or tap the NO
soft key to abandon the calibration and return to the main
display.
--End--
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.