User's Manual

Key number assignments 239
Key number assignments
The IP Softphone 2050 has 6 keys that present 12 feature keys, with 6 on
each feature key page. The keys are numbered from 0 to 11. The Shift
key is used to change between two feature pages, 0 to 5 and 6 to 11.
If a feature requires a feature package that is not present for the Call
Server installation, that feature does not appear within the default
configuration for the IP Softphone 2050.
The Message key is numbered 16. If Message Waiting is not configured,
then key 16 must be NUL.
Key numbers between 17 to 31 are assigned to the four soft label keys
immediately below the display area. The supported features are: A03,
A06, CFW, CHG, CPN, PRK, PRS, RGA, RPN, SCU, SCC, SSU, SSC,
and TRN.
Table 35 "IP Softphone 2050 soft keys" (page 239) describes the IP Phone
feature assignment for each soft key. Use LD 11 to program keys 16 to 26
on the IP Softphone 2050.
If you attempt to configure anything other than the permitted response, the
Call Server generates an error code.
Table 35
IP Softphone 2050 soft keys
Prompt Response Description
Key 16
MWK
NUL
Message Waiting key
Removes function or feature from key
Key 17
TRN
NUL
Call Transfer key
Removes function or feature from key
Key 18
A03
A06
NUL
three-party conference key
six-party conference key
Removes function or feature from key
Key 19
CFW
NUL
Call Forward key
Removes function or feature from key
Key 20
RGA
NUL
Ring Again key
Removes function or feature from key
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.