User's Manual

242 Nortel IP Softphone 2050
Table 36
IP Softphone 2050 package components (cont’d.)
Component Code
Nortel Mobile USB Headset Adapter (no headset) (RoHS) NTEX14MAE6
Nortel Enhanced USB Adapter (desktop)
Nortel Enhanced USB Audio (desktop) kit NTEX14AA
Nortel Enhanced USB Audio Adapter (no headset) NTEX14AB
USB Audio Kit with GNN DuraPlus Monaural Headset
(Non-RoHS)
NTEX14AC
USB Audio kit with GNN DuraPlus Monaural Headset (RoHS) NTEX14ACE6
Nortel Handset cord (Charcoal) for use with the Nortel
Enhanced USB Audio Adapter Kit
NTEX14BA
Before you begin
The following section provides a step-by-step guide through the
IP Softphone 2050 configuration process. Complete the following
pre-installation checklist.
Procedure 55
Preinstallation checklist
Step Action
1 Ensure you have the IP Softphone 2050 application software CD.
2 Ensure you install the Licensing Server.
3 Ensure the host call server is equipped with a Signaling Server
that runs the Line Terminal Proxy Server (LTPS) application.
4 Understand the following configuration modes from which you
can choose from as you proceed through the installation of the
IP Softphone 2050.
• Static IP address—During installation, use the dialpad to
enter the IP address, subnet mask, and default Gateway
address. You must also enter the Connect Server parameters
including IP address, port number, action, and retry count.
• Partial DHCP—During installation, use the dialpad to enter
the Connect Server parameters including: IP address, port
number, action, retry count, IP Phone password, node ID,
and TN. Other parameters (IP Phone IP address, subnet
mask, and default Gateway) are obtained from the DHCP
server.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.