User's Manual

254 Nortel IP Softphone 2050
To verify Windows QoS Packet Scheduler is installed, go to Control Panel
> Network Connections (Windows XP) or Network and Dialup Connections
(Windows 2000) > Local Area Connection > Properties > QoS Packet
Scheduler.
Running the IP Softphone 2050 for the first time
Start the IP Softphone 2050 in one of the following ways
•
Select Start > Programs > Nortel > IP Softphone 2050.
• Click the desktop shortcut (if one was created during the installation).
• Click Automatic startup sequence.
If you want the IP Softphone 2050 to start automatically when the PC
starts, create a shortcut to the application in the Startup folder
When an IP Softphone 2050 is started for the first time and connects to the
network, the IP Softphone executes the following start-up sequence
1. Obtain the IP parameters.
2. Find a Media Gateway server and authenticate the user.
As the IP Softphone 2050 registers with the Signaling Server, one of the
following occurs
•
If a non-null node password is enabled, you are prompted to enter the
node number and password. Use the keyboard or numeric keypad
to enter the prompts for a node number and password. After the
password is verified, enter the TN of the IP Softphone 2050. See IP
Line Fundamentals (NN43100-500) for further information about the
password feature.
•
If the null node password is configured and enabled, these screens are
skipped and no option is provided to change the password.
•
If the node password is disabled or not configured, it prompts for
a node number and TN. Enter the node number and TN using the
keyboard or numeric keypad.
Redeploying the IP Softphone 2050
This procedure is required for a new user of the IP Softphone 2050
application.
Procedure 68
Redeploying the TN of an existing IP Softphone 2050
Step Action
1 Exit the IP Softphone 2050 application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.