User's Manual

Maintenance 255

2 Restart the IP Softphone 2050 application.

If you do not configure or enable the node password, go to step

If you configure and enable the node password, go to step 4.

3 During startup, the IP Softphone 2050 registers again with the

TPS, and the IP Softphone 2050 displays the existing node

number and TN for approximately five seconds.

4 If you configure and the password for the node, the node number

and password prompt displays for approximately 5 seconds;

enter the correct password within this 5-second period.

If you activate the Clear soft key during the 5-second period, the

existing node and TN clear and you can enter new parameters.

--End--

Removing an IP Softphone 2050 from service

Procedure 69

Removing an IP Softphone 2050 from service

Step Action

1 Exit the IP Softphone 2050 application.

2 Uninstall the IP Softphone 2050 application from the PC using

the Windows Add/Remove Programs.

In LD 11, enter OUT at the TN prompt.

--End--

Maintenance

Diagnostics provides a method to detect and resolve issues you encounter

with the IP Softphone 2050. Launch the Diagnostic feature from the Help

menu.

The data coverage for this feature includes

• “System data” (page 256)

• “User data” (page 256)

• “Ethernet statistics” (page 257)

• “IP Networking Statistics” (page 258)

• “ICMP Statistics” (page 259)

• “Audio Connection Data” (page 259)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009