User's Manual

26 Nortel IP Phone 2001

• Procedure 4 “Installing an IP Phone 2001 using DHCP” (page 46)

• Procedure 5 “Enabling Full Duplex mode” (page 53)

• Procedure 6 “Checking Ethernet Statistics” (page 54)

•

Procedure 7 “Changing the TN of an existing IP Phone 2001” (page

55)

• Procedure 8 “Replacing an IP Phone 2001” (page 56)

• Procedure 9 “Removing an IP Phone 2001 from service” (page 56)

After you install and configure an IP Phone, if power to the phone is

interrupted, you need not re-enter the IP parameters, node number,

Terminal Number (TN), or reacquisition of firmware.

Description

The IP Phone 2001 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000). The IP Phone 2001

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 2001 network and CS 1000

connections.

Figure 1 "IP Phone 2001" (page 26) shows the IP Phone 2001.

Figure 1

IP Phone 2001

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009