User's Manual

286 Nortel Mobile Voice Client 2050
Procedure 74
Enabling Auto-Create
Step Action
1 Select Settings.
2 Select Hardware ID.
3 Select Auto-Create.
--End--
Table 38 "Hardware ID screen" (page 286) provides information about the
Hardware ID screen.
Table 38
Hardware ID screen
Selection
Description
Hardware ID This box contains the MAC address for
the Ethernet hardware installed in your
device. MVC 2050 uses the MAC address
of the Ethernet hardware as its hardware
ID. You may have to change this value if
there is more than one MAC address, or if
the device is using an extranet client that
hides the true MAC address. For example,
the Nortel Contivity Extranet Switch uses
a single MAC address for all clients. This
might cause connection problems with
your communication server.
Auto-create This changes the MAC address that
appears in the Hardware ID box. If your
device has more than one MAC address,
tap the Auto-Create button to cycle
through the set of MAC addresses on your
computer. Auto-Create also makes up
random hardware IDs in case the Ethernet
hardware addresses are not unique to the
communication server.
Firmware Version Shows the build number of MVC 2050
installed on your device. This value is
the version number of the application last
reported by the server.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.