User's Manual

294 Nortel IP Phone 1110

This section contains the following procedures

•

Procedure 75 “Configuring the IP Phone 1110 ” (page 305)

• Procedure 76 “Installing the IP Phone 1110 using manual

configuration” (page 311)

• Procedure 77 “Installing an IP Phone 1110 using DHCP” (page 319)

• Procedure 78 “Enabling Full Duplex mode” (page 328)

• Procedure 80 “Changing the TN of an existing IP Phone 1110” (page

330)

•

Procedure 81 “Replacing an IP Phone 1110” (page 331)

• Procedure 82 “Removing an IP Phone 1110 from service” (page 331)

Description

The IP Phone 1110 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000) . The IP Phone 1110

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 1110 network and CS 1000

connections.

Figure 33 "IP Phone 1110" (page 295) shows the IP Phone 1110.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009