User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

311

312

313

314

315

316

317

318

319

320

Installation and configuration 317

Screen prompt

Description

Duplex (0-A, 1-F, 2-H) Default 1 (for Auto).

0 = Auto

1 = Full

2 = Half

You are not prompted for Duplex

if PC Port is set to 0 for Off and if

Speed is set to 0 for Auto.

Data 802.1Q (0-N, 1-Y)

You are not prompted for Data

802.1Q if PC Port is set to 0 for

Off.

Data VLAN? (0-N, 1-Y) Default 0 (for No).

You are not prompted for Data

VLAN if PC port is set to 0 for

Off.

Data VLAN Cfg? (0-Auto, 1-Man) Default 1 (for Man)

You are not prompted for Data

VLAN Cfg if LLDP or Data VLAN

are not enabled and PC Port is

set to 0 for Off.

If you select 0 (for Auto), VLAN

ID is automatically configured to

the value received in the VLAN

NAME TLV.

Data VLAN ID:

You are not prompted for Data

VLAN ID if Data VLAN is set to 0

for Auto.

Data pBits (0-7, 8-Au) Default 8 (for Au).

You are not prompted for Data

pBits if the PC Port is set to 0 for

Off or if 802.1Q is not enabled.

PCUntagAll? (0-N, 1-Y) Default 0 (for No).

PSK SRTP? (0-No, 1-Yes) Default 0 (for No).

GARP Ignore? (0-No,1-Yes) Default 0 (for No).

The IP Phone 1110 supports remote firmware upgrades through

a TFTP process and an automated UFTP process.

You are prompted to enter the TFTP Server IP address if you are

using a TFTP Server to download the current firmware.

The method to upgrade the firmware depends on the following

Call Server software

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009