User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

311

312

313

314

315

316

317

318

319

320

318 Nortel IP Phone 1110

• For CS 1000 Release 4.0, the TFTP Server is required to

download the current firmware. Enter the TFTP Server IP

address at the prompt.

•

For CS 1000 Release 4.5, use either a TFTP Server to

upgrade the firmware (at the prompt accept the default entry

of 0.0.0.0) or UFTP to download the current firmware.

•

For CS 1000 Release 5.0, a Signaling Server provides the

firmware for the IP Phones. Check the Nortel Web site at

ww.nortel.com

for updated firmware files.

For CS 1000 Release 4.0, the IP Phone 1110 searches for the

TFTP Server for firmware upgrade. If the file name specified

in 1110.cfg is not the same as the current firmware, the IP

Phone downloads the file and upgrades the firmware. This takes

several minutes. When the upgrade is complete, the IP Phone

1110 reboots.

For further information about TFTP Server configuration, see

“TFTP Server” (page 557).

The Enhanced UNIStim firmware download is supported on CS

1000 Release 4.5 or later. The Enhanced UNIStim firmware

download feature for IP Phones improves the delivery of new

firmware to IP Phones. For further information about Enhanced

UNIStim Firmware Download, see

IP Line Fundamentals

(NN43100-500).

For information about the IP Phone firmware upgrade

using Element Manager, see Element Manager System

Reference—Administration (NN43001-632).

The IP Phone 1110 can support primary (S1) and secondary

(S2) connect server. If you require IP Phones to register on

multiple nodes, see IP Line Fundamentals (NN43100-500).

The IP Phone 1110 saves the configuration and then reboots.

The IP Phone 1110 searches for the connect server.

The IP Phone 1110 registers with the TPS and, if needed, begins

the firmware download. This takes several minutes. When

registration is complete, the IP Phone 1110 resets.

The current Call Server date and time appear on the top line of

the display when the configuration is complete. Self-labeling

keys also appear.

10 Check for a dial tone and the correct DN above the display.

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009