User's Manual

Installation and configuration 321
b If you select Partial DHCP, then you must enter the following
parameters.
ATTENTION
Not all parameters appear when you install the IP Phone for the
first time.
Screen prompt
Description
S1 IP The primary CS 1000 node IP
address for the IP Phone 1110.
S1 Port TPS Server 1 port number
Enter 4100.
S1 action
Choose one of the following:
•
for TPS only, enter 1.
• for TPS and Secure
Multimedia Controller,
enter 6.
For more information about
Secure Multimedia Controller,
see Secure Multimedia
Controller Implementation
Guide (NN43001-325).
You are not prompted for S1
PK if S1 Action is set to 1.
S1 retry count The maximum number of times
the IP Phone 1110 tries again
to connect to the server after
the first try is unsuccessful.
Enter 10.
S1 PK
To manually configure the PK,
set DHCP to Partial or None.
Default is ffffffffffffffff.
The Private key of the Secure
Multimedia Controller to which
the IP Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit
hexadecimal number. Use a
USB keyboard to enter ALPHA
digits from a to f.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.