User's Manual

Installation and configuration 323
Screen prompt
Description
Cfg XAS? (0-No,1-Yes)
Default 1 (for Yes).
If no External Application
Server (XAS) is present,
enter 0 (for No). You are not
prompted to enter the XAS IP
address.
XAS IP: Enter the IP address of the
XAS server.
The IP Phone 1110 currently
does not support an XAS.
Speed (0-A, 1-10, 2-100) Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for
Speed if PC Port is set to 0 for
Off.
Duplex (0-A, 1-F, 2-H) Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for
Duplex if PC Port is set to 0 for
Off or if Speed is set to 0 for
Auto.
9 Enter the following parameters
Screen prompt
Description
802.1Q (0-No, 1-Yes) Default 1 (for Yes).
You are not prompted for 802.1Q
if LLDP is not enabled.
Voice VLAN (0-N, 1-Y) Default 0 (for No).
You are not prompted for Voice
VLAN if 802.1Q is not enabled.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.