User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

321

322

323

324

325

326

327

328

329

330

328 Nortel IP Phone 1110

Procedure 78

Enabling Full Duplex mode

Step Action

1 Double-press the Services key to access the Local Tools menu.

Press 3. Network Configuration to access the configuration

menu.

2 If no other configuration changes are required, press OK

repeatedly until the Duplex network option appears.

3 Select 1 to enable Full Duplex mode.

4 When the Speed option appears, select one of the following

•

0 for 10 Mb/s

• 1 for 100 Mb/s (default)

5 Press OK repeatedly until the Duplex network option appears.

6 Select 1 to enable Full-duplex mode.

7 Select OK to confirm the change.

8 Press OKEnter repeatedly. The IP Phone saves the

configuration and then reboots.

9 Restart the IP Phone. The firmware settings are read and are

applied to UPLINK and the PC Ethernet Port.

--End--

When the IP Phone restarts, the firmware reads the setting for Full Duplex

mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and

speed accordingly.

Use Procedure 79 “Checking Ethernet Statistics” (page 328) to confirm

activation of Full Duplex mode.

Procedure 79

Checking Ethernet Statistics

Step Action

1 Double-press the Services key.

2 Press 2 to select Local Diagnostics, then press 3 to open the

Ethernet Statistics menu.

If Full Duplex mode is active, the following is displayed

• Link Status: UP

• Duplex Mode: Full

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009