User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

341

342

343

344

345

346

347

348

349

350

Key number assignments 343

The information in the display area changes, according to the

call-processing state and active features.

Because the IP Phone 1120E only has a one-line information display area,

you are prompted to scroll through any additional lines of information.

During an incoming call, only the Directory Number (DN) displays if the

caller name is greater than 10 characters. Press the flashing arrow to

display the caller name.

Context-sensitive soft key label display

The context-sensitive soft key label has a maximum of seven characters.

Each soft key includes the soft key label and an icon. When a soft key is

in use, a triangle icon displays at the beginning of the soft key label, and

the label shifts one character to the right. (If the label is six characters in

length, the last or rightmost character is truncated.) If a feature is enabled,

the icon state turns to On. It remains in the on state until the feature key

is pressed again. This cancels the enabled feature and turns the icon off,

returning the soft key label to its original state.

Use the More soft key to navigate through the layers of functions. If only

four functions are assigned to the soft keys, the More key does not appear,

and all four functions are displayed.

Cleaning the IP Phone display screen

Gently wipe the IP Phone display screen with a soft, dry cloth.

CAUTION

Do not use any liquids or powders on the IP Phone. Using

anything other than a soft, dry cloth can contaminate IP Phone

components and cause premature failure.

Key number assignments

Key numbers 1 to 15 are used for Programmable line (DN)/feature keys.

These keys can be any DN or feature except for Message Waiting and

those configured on keys 17 to 26.

You can assign a maximum of nine functions to the four soft-labeled,

predefined soft keys. Because the soft keys are predefined, the user

cannot change the key number assignment. Functions are assigned to the

soft keys in layers in LD 11.

The Message Waiting key is numbered 16.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009