User's Manual

Installation and configuration 347

2 Configure the IP Phone 1120E on the Call Server using LD 11.

At the prompt, enter the following

REQ:new

TYPE: 1120

For more information about configuring the IP Phone 1120E usi

ng LD 11, see Software Input Output Reference-Administration

(NN43001-611).

CAUTION

The IP Phone 1120E is shipped with the stand locked

in position. To avoid damaging the IP Phone, press

the wall-mount lever located under the Handsfree key

to release the stand and pull it away from the phone.

See Figure 41 "Release the IP Phone 1120E from the

stand" (page 347).

Figure 41

Release the IP Phone 1120E from the stand

3 Remove the stand cover. Pull upward on the center catch and

remove the stand cover. The cable routing tracks are now

accessible. See Figure 42 "Stand cover removed" (page 348).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009