User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

351

352

353

354

355

356

357

358

359

360

354 Nortel IP Phone 1120E

A DHCP server and DHCP relay agents must also be installed,

configured, and running if you choose Partial DHCP, or Full

DHCP configuration.

For more information about how to set up DHCP servers for use

with the IP Phones, see

Converging the Data Network with VoIP

Fundamentals (NN43001-260).

8 Press the Enter key.

9 Use the Right navigation key to scroll and highlight SET IP.

Press the Enter key to start the edit mode. Use the dialpad to fill

in the information:

Set IP—a valid IP Phone 1120E IP address

10 Use the Right navigation key to scroll and highlight NET MASK.

Press the Enter key to start the edit mode. Use the dialpad to fill

in the information:

Net Mask—a subnet mask

11 Use the Right navigation key to scroll and highlight Gateway.

Press the Enter key to start the edit mode. Use the dialpad to fill

in the information:

Gateway—the default gateway for the IP Phone 1120E on the

LAN segment to which it connects

12 Use the Right navigation key to scroll and highlight S1 IP. Press

the Enter key to start the edit mode. Use the dialpad to fill in the

information:

S1 IP—the primary CS 1000 node IP address for the IP Phone

1120E

13 Use the Right navigation key to scroll and highlight Port.

S1 Port—a fixed value of 4100

14 Use the Right navigation key to scroll and highlight S1 Action.

Press the Enter key to start the edit mode. Use the dialpad to fill

in the information. Choose one of the following

• for TPS only, enter 1

• for TPS and Secure Multimedia Controller, enter 6

For more information about Secure Multimedia Controller,

see Secure Multimedia Controller Implementation Guide

(NN43001-325).

15 Use the Right navigation key to scroll and highlight Retry. Press

the Enter key to start the edit mode. Use the dialpad to fill in the

information:

Retry—the maximum number of times the IP Phone 1120E tries

again to connect to the server after the first try is unsuccessful.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009