User's Manual

356 Nortel IP Phone 1120E
S2 PK—the Private key of the alternate Secure Multimedia
Controller to which the IP Phone connects.
23 Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S2 PK Default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits, use a USB keyboard to enter the
following:
#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
24 Use the Right navigation key to scroll and highlight Ntwk Port
Speed box. Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of
the following options
• Auto—Link speed is autonegotiated with the network device
• 10BT Full—Link speed is available for up to 10 Megabit Full
Duplex on the network
• 100BT Full—Link speed is available for up to 100 Megabit
Full Duplex on the network
25 Use the Right navigation key to scroll and highlight Ntwk Port
Duplex box. Press the Down navigation key to open the list box.
The Ntwk Port Duplex option appears dimmed if Ntwk Port
Speed is set to Auto.
Use the Up/Down navigation keys to scroll and highlight one of
the following options
•
Auto—Duplex mode is autonegotiated with the network
device
• Force Full—Duplex mode is forced to Full Duplex on the
network
• Force Half—Duplex mode is forced to Half Duplex on the
network
26 Use the Right navigation key to scroll and highlight Disable
Voice 802.1Q check box. Press the Enter key to switch this item
on and off.
27 Use the Right navigation key to scroll and highlight VoiceVLAN
box. Press the Down navigation key to open the list box.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.