User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

351

352

353

354

355

356

357

358

359

360

360 Nortel IP Phone 1120E

The method to upgrade the firmware depends on the following

Call Server software

• For Succession Release 3.0 or CS 1000 Release 4.0, the

TFTP Server is required to download the current firmware.

Enter the TFTP Server IP address at the prompt.

• For CS 1000 Release 4.5, use either a TFTP Server to

upgrade the firmware (at the prompt accept the default entry

of 0.0.0.0) or UFTP to download the current firmware.

•

For CS 1000 Release 5.0, a Signaling Server provides the

firmware for the IP Phones. Check the Nortel Web site at

ww.nortel.com

for updated firmware files.

For Succession Release 3.0 and CS 1000 Release 4.0, the

IP Phone 1120E searches for the TFTP Server for firmware

upgrade. If the file name specified in 1120e.cfg is not the same

as the current firmware, the IP Phone downloads the file and

upgrades the firmware. This takes several minutes. When the

upgrade is complete, the IP Phone 1120E reboots.

For further information about TFTP Server configuration, see

“TFTP Server” (page 557).

The Enhanced UNIStim firmware download is supported on CS

1000 Release 4.5 or later. The Enhanced UNIStim firmware

download feature for IP Phones improves the delivery of new

firmware to IP Phones. For further information about Enhanced

UNIStim Firmware Download, see

IP Line Fundamentals

(NN43100-500).

For information about the IP Phone firmware upgrade

using Element Manager, see Element Manager System

Reference—Administration (NN43001-632).

47 The IP Phone 1120E searches for the connect server.

The IP Phone 1120E registers with the Terminal Proxy Server

(TPS) and, if needed, begins the firmware download. This takes

several minutes. When download is complete, the IP Phone

1120E resets.

The current Call Server date and time appear on the top line of

the display when the configuration is complete. Self-labeling

keys also appear.

48 Check for a dial tone and the correct DN on the display.

49 (Optional) Customize the feature keys as required. For more

information, see IP Line Fundamentals (NN43100-500).

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009