User's Manual

Installation and configuration 383

Figure 49

IP Phone 1140E connections

5 Install the handset. Connect the end of the handset cable with

the short straight section into the handset. Connect the end of

the handset cable with the long straight section to the back of the

phone, using the RJ-9 handset jack. Form a small bend in the

cable, and then thread the handset cord through the channels

in the stand so that it exits behind the handset on the right side,

in the channel exit in the stand base marked with the handset

symbol. See Figure 50 "Cable routing tracks" (page 384).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009