User's Manual

Installation and configuration 389
S1 IP—the primary CS 1000 node IP address for the IP Phone
1140E
13 Use the Right navigation key to scroll and highlight Port.
S1 Port—a fixed value of 4100
14 Use the Right navigation key to scroll and highlight S1 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill
in the information. Choose one of the following
• for TPS only, enter 1
•
for TPS and Secure Multimedia Controller, enter 6
For more information about Secure Multimedia Controller,
see Secure Multimedia Controller Implementation Guide
(NN43001-325).
15 Use the Right navigation key to scroll and highlight Retry. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
Retry—the maximum number of times the IP Phone 1140E tries
again to connect to the server after the first try is unsuccessful.
16 Use the Right navigation key to scroll and highlight S1 PK.
S1 PK—the Private key of the Secure Multimedia Controller to
which the IP Phone connects.
17 Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S1 PK Default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits, use a USB keyboard to enter the
following:
#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
18 Use the Right navigation key to scroll and highlight S2 IP. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
S2 IP—the secondary CS 1000 node IP address for the IP
Phone 1140E
The IP Phone 1140E can support a primary (S1) and secondary
(S1) connect server. If you require IP Phones to register on
multiple nodes, see IP Line Fundamentals (NN43100-500).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.