User's Manual

390 Nortel IP Phone 1140E
19 Use the Right navigation key to scroll and highlight Port. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
Port—same as S1 port
20 Use the Right navigation key to scroll and highlight S2 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill
in the information. Choose one of the following
•
for TPS only, enter 1
• for TPS and Secure Multimedia Controller, enter 6
For more information about Secure Multimedia Controller,
see Secure Multimedia Controller Implementation Guide
(NN43001-325).
21 Use the Right navigation key to scroll and highlight Retry. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information:
Retry—same as S1
22 Use the Right navigation key to scroll and highlight S2 PK.
S2 PK—the Private key of the alternate Secure Multimedia
Controller to which the IP Phone connects.
23 Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S2 PK Default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits, use a USB keyboard to enter the
following:
#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
24 Use the Right navigation key to scroll and highlight Ntwk Port
Speed box. Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of
the following options
• Auto—Link speed is autonegotiated with the network device
• 10BT Full—Link speed is available for up to 10 Megabit Full
Duplex on the network
• 100BT Full—Link speed is available for up to 100 Megabit
Full Duplex on the network
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.