User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

391

392

393

394

395

396

397

398

399

400

394 Nortel IP Phone 1140E

44 If the XAS supports graphical displays, use the Right navigation

key to scroll and highlight Graphical XAS check box. Press the

Enter key to switch this item on and off.

45 Use the Right navigation key to scroll and highlight Port list.

Press the Enter key to start the edit mode. Use the dialpad to fill

in the information.

46 Use the Right navigation key to scroll and highlight Enable

Bluetooth list. Press the Enter key. Press the Down navigation

key to open the list box.

47 Use the Up/Down navigation keys to scroll and highlight one of

the following options

•

Auto—(default) Bluetooth wireless technology setting

received through TFTP configuration

• Yes—Bluetooth wireless technology is enabled on the IP

Phone

•

No—Bluetooth wireless technology is disabled on the IP

Phone

For further information about Bluetooth wireless technology, see

“Bluetooth and Wireless Fidelity interference” (page 541).

48 Upgrade the IP Phone 1140E firmware.

Use the Right navigation key to scroll and highlight TFTP IP

list. The IP Phone 1140E supports remote firmware upgrades

through a TFTP process and an automated UFTP process.

The method to upgrade the firmware depends on the following

Call Server software

•

For Succession Release 3.0 or CS 1000 Release 4.0, the

TFTP Server is required to download the current firmware.

Enter the TFTP Server IP address at the prompt.

•

For CS 1000 Release 4.5, use either a TFTP Server to

upgrade the firmware (at the prompt accept the default entry

of 0.0.0.0) or UFTP to download the current firmware.

• For CS 1000 Release 5.0, a Signaling Server provides the

firmware for the IP Phones. Check the Nortel Web site at

ww.nortel.com for updated firmware files.

For Succession Release 3.0 and CS 1000 Release 4.0, the

IP Phone 1140E searches for the TFTP Server for firmware

upgrade. If the file name specified in 1140e.cfg is not the same

as the current firmware, the IP Phone downloads the file and

upgrades the firmware. This takes several minutes. When the

upgrade is complete, the IP Phone 1140E reboots.

For further information about TFTP Server configuration, see

“TFTP Server” (page 557).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009