User's Manual

426 Nortel IP Phone 1150E
continue to push the phone towards the base until you hear a
click. Ensure the phone is securely locked in to position.
--End--
Startup sequence
When an IP Phone 1150E connects to the network, it must perform a
startup sequence. The elements of the startup sequence include
•
obtaining VLAN ID (if supported by the network infrastructure)
• obtaining the IP parameters
•
connecting to the Call Server
• obtaining a User ID
See Table 68 "IP Phone 1150E IP parameters" (page 426) for a summary
of the IP parameters and how they are obtained.
Table 68
IP Phone 1150E IP parameters
Parameter Method of acquisition
VLAN ID Manually entered or automatically obtained through DHCP
or LLDP.
IP Address Manually entered or automatically retrieved through partial
or full DHCP.
Net Mask Manually entered or automatically retrieved through partial
or full DHCP.
Default Gateway Address Manually entered or automatically retrieved through partial
or full DHCP.
Connect Server (IP address, port,
action, and retry count—primary
and secondary)
Manually entered or automatically retrieved through
User ID (node ID, node password
and TN)
Manually entered for first-time configuration. Retrieved from
local storage on subsequent power cycles.
Installing the IP Phone 1150E
To install the IP Phone 1150E, use Procedure 98 “Installing the IP Phone
1150E ” (page 427).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.