User's Manual

Installation and configuration 43
S2 PK
To manually configure the PK,
set the Action Byte to 6. After
you enter the PK, apply the
changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the alternate
Secure Multimedia Controller to
which the IP Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits from a to
f, enter the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Speed (0-A, 1-10, 2-100) Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
Duplex (0-A, 1-F, 2-H) Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex
if Speed is set to 0 for Auto.
Cfg XAS? (0-No,1-Yes)
Default 0 (for No).
If no External Application Server
(XAS) is present, enter 0 (for
No). You are not prompted to
enter the XAS IP address.
XAS IP: Enter the IP address of the XAS
server.
802.1Q (0-No, 1-Yes) Default 1 (for Yes).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.