User's Manual

438 Nortel IP Phone 1150E
Bluetooth wireless technology
The IP Phone 1150E supports Bluetooth wireless technology . For
information about configuring Bluetooth wireless technology on the IP
Phone 1150E, see “Headset support” (page 543).
Redeploying an IP Phone 1150E
You can redeploy an existing previously configured IP Phone 1150E on
the same system. For example, the IP Phone 1150E can be assigned to
a new user (new TN) or to an existing user who moved to a new subnet
by changing the TN of the IP Phone 1150E. For further information, see
Converging the Data Network with VoIP Fundamentals (NN43001-260).
Procedure 101
Changing the TN of an existing IP Phone 1150E
Step Action
1 Repower the IP Phone 1150E.
During the reboot sequence of a previously configured IP Phone,
the IP Phone 1150E displays the existing node number for
approximately five seconds.
2 If the node password is enabled and NULL, choose one of the
following
a Disable the password.
b Set the password as non-NULL.
3 Press OK when the node number displays.
If Then
the node password is enabled
and is not NULL
a password screen displays. Go
to Step 4.
the node password is disabled a TN screen displays. Go to Step
5.
4 Enter the password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
5 Select the Clear soft key to clear the existing TN.
6 Enter the new TN.
--End--
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.