User's Manual

Installation and configuration 45

VLANFILTER (0-N, 1-Y)

Default 0 (for No).

You are not prompted for

VLANFILTER if VLAN is not

enabled.

Ctrl pBits (0-7, 8-Au) Default 8 (for Auto).

You are not prompted for Ctrl

pBits if 802.1Q is not enabled.

Media pBits (0-7, 8-Au) Default 8 (for Auto).

You are not prompted for Media

pBits if 802.1Q is not enabled.

PSK SRTP? (0 for No, 1 for Yes) Default 0 (for No).

GARP Ignore? (0-No,1-Yes) Default 0 (for No).

The IP Phone 2001 saves the configuration and then reboots.

The IP Phone 2001 searches for the connect server.

9 Enter the following information:

Screen prompt

Description

Password

IP Phone Installer Password.

You are not prompted to enter the IP Phone

Installer Password if it has not been configured

in your system.

Node The node ID.

TN The TN or VTN.

The IP Phone 2001 registers with the Terminal Proxy Server

(TPS) and, if needed, begins the firmware download. This takes

several minutes. When the download is complete, the IP Phone

2001 resets.

The current system date and time appear on the top line of the

display when the configuration is complete. Self-labeling keys

also appear.

10 Check for a dial tone and the correct DN above the display.

11 (Optional) Customize the feature keys as required. For more

information, see

IP Phone 2001 User Guide (NN43115-102).

--End--

The IP Phone 2001 can support primary (S1) and secondary (S2) connect

server. If you require IP Phones to register on multiple nodes, see IP Line

Fundamentals (NN43100-500).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009