User's Manual

460 Features overview
To configure PSK SRTP on IP Phones, see the following procedures:
•
Phase II IP Phone 2001, Phase II IP Phone 2002, Phase II IP Phone
2004, and IP Phone 1110—Procedure 105 “Enabling SRTP media
encryption on a Phase II IP Phone and IP Phone 1110” (page 460)
• IP Phone 2007—Procedure 106 “Enabling SRTP media encryption on
an IP Phone 2007” (page 460)
• IP Phone 1120E, IP Phone 1140E, and IP Phone 1150E—Procedure
107 “Enabling SRTP media encryption on an IP Phone 1120E, IP
Phone 1140E, or IP Phone 1150E” (page 461)
Procedure 105
Enabling SRTP media encryption on a Phase II IP Phone and IP Phone 1110
Step Action
1 Disconnect then reconnect the power on the IP Phone to reset it.
2 When the Nortel logo appears, press each of the four soft keys
at the bottom of the display in sequence from left to right, one at
a time.
3 If no other configuration changes are required, press OK
repeatedly until PSK SRTP (0-No, 1-Yes) option appears.
4 Press 1 to enable PSK SRTP.
5 Press OK.
6 Restart the IP Phone.
--End--
For more information about configuring an IP Phone, see the applicable
section in this document.
Procedure 106
Enabling SRTP media encryption on an IP Phone 2007
Step Action
1 Tap the Tools icon.
2 Select Network Configuration.
3 Use the Right navigation key to scroll to Enable PSK SRTP. The
current setting displays.
4 Select the check box to enable SRTP media encryption.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.