User's Manual

48 Nortel IP Phone 2001
• the S1 action
•
the S1 retry count (this is the maximum number of times
the IP Phone 2001 tries again to connect to the server
after the first try is unsuccessful)
• the S2 IP (the secondary CS 1000 node IP address of the
IP Phone)
•
the S2 action
•
the S2 retry count
b If you select Partial DHCP, then you must enter the following
parameters:
Screen prompt
Description
S1 IP The primary CS 1000 node IP address for
the IP Phone 2001.
S1 Port TPS Server 1 port number
Enter 4100.
S1 action
Choose one of the following:
•
for TPS only, enter 1.
• for TPS and Secure Multimedia
Controller, enter 6.
For more information about Secure
Multimedia Controller, see Secure
Multimedia Controller Implementation
Guide (NN43001-325).
You are not prompted for S1 PK if the S1
action is set to 1.
S1 retry count The maximum number of times the IP
Phone 2001 tries again to connect to the
server after the first try is unsuccessful.
Enter 10.
S1 PK
To manually configure the PK, set the
Action Byte to 6. After you enter the PK,
apply the changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the Secure Multimedia
Controller to which the IP Phone connects.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.