User's Manual

Text-based diagnostic utilities 497
Use Procedure 110 “Accessing the Network Diagnostic Tools menu in
Local mode” (page 497) to access the Network Diagnostic Tools in Local
mode.
Procedure 110
Accessing the Network Diagnostic Tools menu in Local mode
Step Action
1 Double-press the Services key. The Local Main Menu, Network
Diagnostic Tools, appears.
2 Press Cancel to quit, or use the Navigation keys to scroll
through the menu and select one of the following
•
Ping
•
TraceRoute
•
Ethernet Statistics
• IP Network Statistics
•
IP Set & DHCP Information
--End--
Procedure 111
Executing Ping
Step Action
1 Select Ping from the Network Diagnostic Tools submenu.
2 Press the IP soft key and enter the IP address to Ping.
Tip: Use the dialpad to enter the IP address. The * key is used
for dots and the # key produces a space.
3 Press the Ping soft key. The results of the Ping appear on the
display.
4 Use the Navigation keys to browse the data. See Figure 64
"PING data display page" (page 509).
Tip: Press the Ping soft key again to stop the pinging.
5 Press one of the following soft keys
• Reset — to clear the data
• Exit — to return to the Network Diagnostic Tools menu.
--End--
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.