User's Manual

498 IP Phone diagnostic utilities
Procedure 112
Executing TraceRoute
Step Action
1 Select TraceRoute from the Network Diagnostic Tools
submenu.
2 Press the IP soft key and enter the IP address to trace.
3 Press the Tracert soft key. The results of the TraceRoute
appear on the display.
4 Use the Navigation keys to browse the data. See Figure 65
"TraceRoute data display screen" (page 509).
Tip: Press the Tracert soft key again to stop the route tracing.
5 Press one of the following soft keys
•
Reset — to clear the data
• Exit — to return to the Network Diagnostic Tools menu
--End--
Procedure 113
Accessing Ethernet Statistics
Step Action
1 Select Ethernet Statistics from the Network Diagnostic Tools
menu. The Ethernet statistics appear on the display.
2 Use the Navigation keys to browse the data. See Figure 66
"Ethernet Statistics data display page" (page 510).
3 Press one of the following soft keys
•
Reset— to clear the data and reset the statistic counter
•
Exit — to return to the Network Diagnostic Tools menu
--End--
Procedure 114
Accessing IP Network Statistics
Step Action
1 Select IP Network Statistics from the Network Diagnostic
Tools menu. The IP Network Statistics appear on the display.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.