User's Manual

52 Nortel IP Phone 2001

PSK SRTP? (0 for No, 1 for Yes) Default 0 (for No).

GARP Ignore? (0-No,1-Yes) Default 0 (for No).

The IP Phone 2001 saves the configuration and then reboots.

The IP Phone 2001 searches for the connect server.

10 Enter the following information:

Screen prompt Description

Password

IP Phone Installer Password.

You are not prompted to enter the IP Phone

Installer Password if it has not been configured

in your system.

Node The node ID.

TN The TN or VTN.

The IP Phone 2001 registers with the TPS and, if needed, begins

the firmware download. This takes several minutes. When the

download is complete, the IP Phone 2001 resets.

The current system date and time appear on the top line of the

display when the configuration is complete. Self-labeling keys

also appear.

11 Check for a dial tone and the correct DN above the display.

12 (Optional) Customize the feature keys as required. For more

information, see

IP Phone 2001 User Guide (NN43115-102).

--End--

The IP Phone 2001 can support primary (S1) and secondary (S2) connect

server. If you require IP Phones to register on multiple nodes, see IP Line

Fundamentals (NN43100-500).

A Signaling Server provides the firmware for the IP Phones. For

information about upgrading IP Phone firmware, see IP Line Fundamentals

(NN43100-500). For information about the IP Phone firmware

upgrade using Element Manager, see Element Manager System

Reference—Administration (NN43001-632).

Check the Nortel Web site for updated firmware files. See

ww.nortel.com/downloadingcontent for download instructions. Go to

Product Category: Phones, Clients & Accessories, Product Name: IP

Phone 2001, Content type: Firmware. Obtain the precise Release, Status,

and Title of the file from your next level of support.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009