User's Manual

Graphic-based diagnostics utilities 533

2 Press 2 2 on the dialpad to access the Network Diagnostic

Tools menu or use the Up/Down navigation keys to scroll and

highlight the IP Set & DHCP Information option.

3 Press the Select soft key.

You can press the Return soft key exit the menu to return to the

Local Diagnostics submenu.

The screen displays IP/MaxPing/MaxHop, Ping, Tracert, and

Return soft keys.

Figure 79 "Network Diagnostic Tools screen" (page 533) shows

the Network Diagnostic Tools screen.

Figure 79

Network Diagnostic Tools screen

4 Enter an IP address or use the Up/Down navigation keys to

scroll down through the IP addresses.

5 The number of repetitions of the Ping command is shown in the

top bar of the screen. The default is 4.

To change the number of repetitions, use the arrow keys to

select the number and enter a new value using the dialpad.

6 The number of hops for the Tracert command is shown in the

top bar of the screen. The default is 30.

To change the number of hops, use the arrow keys to select the

number and enter a new value using the dialpad.

7 Press the Ping soft key to have the IP Phone attempt to access

the IP address, up to the number of times shown on the top of

the screen.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009