User's Manual

534 IP Phone diagnostic utilities
The IP Phone displays the following
Pinging x.x.x.x with 64 bytes
(where x.x.x.x is the entered IP address)
The Return soft key changes to Stop and the other soft keys
become blank.
The IP Phone attempts to contact (ping) the address the number
of configured times, and displays the results of each attempt.
8 To stop the ping before completing, tap the Stop soft key.
The Stop soft key becomes the Return soft key. The results of
ping are displayed as follows
• Packets transmitted (Tx)
•
Packets received (Rx)
•
Percentage of Packets Lost (Lost)
• Minimum round trip time (Min)
• Maximum round trip time (Max)
•
Average round trip time (Avg)
9 Press the Tracert soft key to request the IP Phone to trace the
route to the entered IP address, up to MaxHop nodes.
The IP Phone displays the following
Tracing route to: (x.x.x.x) over a maximum of y
hops
(where x.x.x.x is the entered IP address and y is the number of
hops displayed at the top of the screen)
The Return soft key changes to Stop and the other soft keys
become blank.
The IP Phone traces the route to the address for the configured
number of server hops, displaying the hop number (starting at 0),
the time in milliseconds, and the IP address.
When the trace is complete, the screen displays the following
Trace complete.
10 To stop Tracert before it completes, tap the Stop soft key.
The Stop soft key becomes the Return soft key when Tracert
stops.
11 Tap the Return soft key to return to Local Tools menu or the
Stop key to exit the menu and return to the IP Phone display.
--End--
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.