User's Manual

Introduction 549
Table 84
[DEVICE_CONFIG] field name definitions
Field name Field value Definition
[DEVICE_CONFIG] Section header for device configuration file
information
DOWNLOAD_MODE FORCED Recommended setting. The version is ignored
and the DEVICE_CONFIG file is always read.
or
VERSION
000001
The version of the device config file
FILENAME 1140eDEV.cfg Device config filename. The file name can be
anything. If a file name is specified, the file
name is loaded to every IP Phone 1140e.
or
*.cfg A wildcard file name enables a different
setting to be configured for every IP Phone.
The IP Phone checks for a file with the
MAC address as the file name (for example,
001365FEF1C6.cfg).
SERVER_IP
xxx.xxx.xxx.xxx
The IP address of the TFTP Server that
downloads the FILENAME file.
Pairing your headset
Use Procedure 146 “Pairing the Bluetooth wireless technology headset
with your IP Phone” (page 549) to pair the Bluetooth wireless technology
headset with your IP Phone.
Procedure 146
Pairing the Bluetooth wireless technology headset with your IP Phone
Step Action
1 Restart your IP Phone using one of the following methods
•
If you are using an AC power adapter, unplug it, wait 10
seconds, and reinsert it.
• If you are using POE, unplug the LAN Ethernet cable, wait 10
seconds, and reinsert it.
2 Double-press the Headset key to open the 3. Bluetooth Setup
dialog box.
The Enable Bluetooth check box is highlighted.
If the 3. Bluetooth Setup menu fails to open when you double
press the Headset key, Bluetooth wireless technology is not
enabled on your phone.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.