User's Manual

Redeploying an IP Phone 2001 55

Extensible Authentication Protocol

Extensible Authentication Protocol (EAP) is a general protocol that fulfills

the protocol requirements defined by 802.1x. For further information about

802.1x, see “802.1x Port-based network access control” (page 479).

Redeploying an IP Phone 2001

You can redeploy an existing previously configured IP Phone 2001 on

the same system. For example, the IP Phone 2001 can be assigned to

a new user (new TN) or to an existing user who moved to a new subnet

by changing the TN of the IP Phone 2001. For further information, see

Converging the Data Network with VoIP Fundamentals (NN43001-260).

Procedure 7

Changing the TN of an existing IP Phone 2001

Step Action

1 Repower the IP Phone 2001.

During the reboot sequence of a previously configured IP

Phone, the IP Phone 2001 displays the existing node number

for approximately five seconds.

2 If the node password is enabled and NULL, choose one of the

following:

a Disable the password.

b Set the password as non-NULL.

3 Press OK when the node number displays.

If Then

the node password is enabled

and is not NULL

a password screen displays. Go

to Step 4.

the node password is disabled a TN screen displays. Go to Step

4 Enter password at the password screen, and press OK.

A TN screen displays.

To obtain the password, enter the nodePwdShow command in

Element Manager. For further information, see Element Manager

System Reference—Administration (NN43001-632).

5 Select the Clear soft key to clear the existing TN.

6 Enter the new TN.

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009